Baby milk powder container HDPE Blow Molding Machine Extrusion manufacturer from China VAINO INTERNATIONAL LIMITED

Baby milk powder container HDPE Blow Molding Machine Extrusion

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Baby milk powder container HDPE Blow Molding Machine Extrusion

Baby milk powder container HDPE Blow Molding Machine Extrusion

Advantage:

1. most important for a good EBM machine is the action system and the extrusion system.

we'r using powerful hydraulic system design with imported valve and pump for stable action

Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs continiously,long life.

2. Heavy and stong structure,make sure machine works more faster and stable.

3. Special protection for the machine and people

Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.

Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.

4. Special care for different countries.

we offer some special design for different countries,in order to matching best performance.

5. Easy die head dis-assemble and assemble

6. Defleshing function included

Center distance introduction:

Double head standard Center distance:180mm (160-200mm optional)

Thriple head standard center distance:120mm(100,,125,130mm option)

Four head standard center distance:100mm(90mm as option)

Six head standard center distance:70mm

1. MP55 carriage movement 380MM, produce small items below 2L,max 2L with single head(depends on the design of the products)

die head have option up to 6 head,have single and double station optional

2. MP70 carriage movement 450mm,produce middle size below 5L,max 5L with single head(depends on the design of the products)

die head have option up to 6 head,have single and double station optional

3. MP80 carriage movement is 540mm,produce containers below 10L,max 10L with single head(depends on the design of the products)

die head have option up to 6 head,have single and double station optional

4. MP70FS carriage movement is 520mm,customized design machine according to products.

die head have option up to 6 head,single station only,expecially for shampoo bottle,multi-layer

5. MP80FS carriage movement is 700mm/800mm/customized design machine according to products.

die head have option up to 6 head,single station only

6. MP100D carriage movement 720

Single and double head optional better for 5L jerrycan in 2 cavities

7. MP85/90/100C Single station,accumulator head for 20-50L chemical container

Machine specification:

		MP80D
Material		PE,PP,(PVC,PA)OPTION
Max container capacity	L	10
Number of die	set	1,2,3,4,6,8
machine Dimension(L×W×H)	M	3.82×2.54×2.5
Total weight	ton	4.5
Clamping force	kn	120
Platen opening stroks	mm	220-620
Stroke of mould board	mm	400
Platen size	mm	420×520
Max mould size(W×H)	mm	480×500
Mould thinkness	mm	225-300
Screw diameter	mm	80
Screw L/D ratio	L/D	24
Plasticising capacity	kg/h	85
Number of heating zone	zone	4
Extruder heating power	kw	18.5
Power of screw-bar machine	kw	0.22
Extruder driving power	kw	30
Number of heating zone	zone	2
Power of die heating	kw	13.5
Max die-pin diameter	mm	180
General power of machine	kw	73.7
Power of the electric motor of oil pump	kw	9.5
Air pressure	Mpa	0.6-0.8
Average energy consumption	kw	35
Using quantity of compression air	m³/min	1.5-2.5
Using quantity of cooling water	m³/min	3.0-5.0