High speed injection molding equipment Synchronous servo motor
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
High speed injection molding equipment Synchronous servo motor
<span style="fon
High speed injection molding equipment Synchronous servo motor
specifications
It adopts imported plastic injection computer ,with large screen high definition crystal dispaly and human -computer interface in both Chinese and English .Through CPU independent control and treatment , it has reised the running speed of the control system and alarming of ultra-high oil temperature ,thus improving the operating speed of the machine
Servo pump pressure controller is specially optimized for the work characteristics of injection molding machine , which is used for repidly and accurately follow the action curve of system pressure directive ,meanwhile ,the digitalized pressure controller integrated to actuator can optimize the controller properties .
Synchronous servo motor with low inertia,wide power range ,high speed and compact structure can guarantee the high dynamic requirements of system.
It is specially designed for servo system,which adopts seal clearance compensation and can maintain high efficiency even under the conditions of low speed rotation and low viscosity oil .
The screen is well protected to prolong its service life .
Description
| SPECIFICATION | ||||
| MODEL | ||||
| Description | UNIT | K3-330 | ||
| INJECTION UNIT | ||||
| Shot volume | Cm³ | 1095 | 1270 | 1458 |
| Shot weight(ps) | g | 1007 | 1168 | 1341 |
| Shot weight(ps) | Oz | 35.5 | 41.2 | 47.3 |
| Screw diameter | mm | 65 | 70 | 75 |
| Injection pressure | Mpa | 181 | 156 | 136 |
| Injection rate | g/sec | 244 | 283 | 325 |
| ScrewL/D ratio | 23.7 | 22 | 20.5 | |
| Screw stroke | mm | 330 | ||
| Screw speed(stepless) | Rpm | 0139 | ||
| Nozzle contact force | ton | 11 | ||
| Clamping force | ton | 330 | ||
| Opening stroke | mm | 650 | ||
| Platen size | mmxmm | 980X980 | ||
| Space between tie bars | mmxmm | 680X680 | ||
| Max.daylight | mm | 1330 | ||
| Mold thickness(min.-max.) | mm | 220-680 | ||
| Hydraulic ejection stroke | mm | 190 | ||
